Why is My dehumidifyer aluminum core is frosting over? - aluminum core scooter wheels
My soul is more aluminum dehumidifier icing. The core of aluminum in the back is the construction of the ice. It is an old and very old model no longer absorbs water from the air that I thought was due to the basic freezing during the race?
Any tips?
Besides a new dehumidifier?
Tuesday, December 8, 2009
Aluminum Core Scooter Wheels Why Is My Dehumidifyer Aluminum Core Is Frosting Over?
2 comments:
Something is dirty or the blower motor is taken. The shift is not enough air through the coils. The other possibility is a. .. sigh ... Freon leak. Looking back, I can tell you. Clean the filter (s), turn the unit off with some compressed air to defrost, leave and try again.
A dehumidifier is simply an air conditioner with evaporator and condenser and the other side rejects any external heat. In fact, the air through the evaporator coils and condenser coils shall be marked before it is discharged into the room. Make sure that the filter coil is clean and you get good airflow through the device. It seems that the dehumidifier can be low refrigerant charge and the safety switch has a low pressure of the compressor, or you could have a bad humidstat switch, switch thermostat broken or a bad connection .. You can communicate with air service of man and examine him for the device.
I am a licensed HVAC technician Universal. He had the same problem with my dehumidifier. He had to install a service port on the drive and found it to load. Added some R-22 and closed the dehumidifier and worked well.
Post a Comment